供应商送检物料流程图说明

zmay

供应商送检物料流程图说明
Explanation of Flow Chart of Parts Sent for Inspection

1. 物资部协助将物料安全、整齐卸置至待检区，并请CKY检验员挂待检标识牌。
   Material department assists to download parts safely and put them orderly in inspection-waiting area. CKY receiving inspectors label the parts with a sign Inspection-Waiting.
2. A.由供应商（也可由采购员代填）齐全、准确地填写物料送检单，并提交送检单和供应商检测报告给CKY检验员；
   Suppliers (or CKY purchasers) fill in Inspection Application Sheet completely and accurately then send the sheet to receiving inspectors together with inspection report from suppliers.
   B. 供应商与CKY检验员共同提取检测样件；
   Suppliers randomly pick out some parts for inspection together with CKY receiving inspectors.
   C. CKY检验员进行检测。
   CKY receiving inspectors inspect the parts.
3. A.CKY检验员检验合格后加盖检验合格章，并在物料外包装上粘贴合格标签；
   Once the parts pass inspection, CKY receiving inspectors put QUALIFIED seal on Inspection Application Sheet and label the lot of parts with sign QUALIFIED PARTS.
   B.进入下一流程。
   Parts go through next flow.
4. A.由CKY检验员在物料外包装上粘贴不合格标签；
   If the parts fail to meet print requirement, CKY receiving inspectors label the parts with sign UNQUALIFIED PARTS
   B.外检检验员通知供应商或采购部物料检测不合格结果；
   CKY receiving inspectors inform suppliers or CKY purchasers of the unqualified parts.
   C.供应商和采购部协调后确定不合格物料处理方式。
   Suppliers and CKY purchase department decide the disposal of unqualified parts after discussing.
   D.进入下一流程
   Parts go through next flow.
5. A.由供应商或采购部办理让步接受单
   Suppliers or CKY purchasers send Deviation Application.
   B.让步接收经EK批准后,由CKY检验员盖让步接收章
   CKY receiving inspectors put DEVIATED seal after the deviation is finally approved by EK.
   C.进入下一流程
   Pars go through next flow.
6. A.由供应商售后服务人员在待检区现场挑选分离，并请CKY检验员将挑选合格物料挂待检标识牌，将不合格物料挂检验不合格标识牌
   Supplier after-sale servicer person sort the parts at receiving-waiting area. CKY receiving inspectors label the qualified parts and unqualified parts with different signs.
   B.进入下一流程
   Parts go through next flow.
7. A.由CKY检验员加盖检验不合格章

游客，本贴VIP会员可浏览，点击这里“自动升级VIP会员”，可快速永久浏览本站所有内容！